• A high-definition product photograph of a black phono earthing ground wire, matching the layout of Pioneer PLX-1200 Phono Earthing Wire 406-PLX-1288. The thin, black cable is coiled in a neat figure-eight shape, secured in the middle with a small black plastic tie. At the bottom right, the two ends of the cable terminate in silver U-shaped spade connectors. The entire cable is isolated against a clean, solid white background with a subtle, soft shadow underneath it.
  • Close-up diagram of the rear connection panel of a turntable, set against a plain white background. On the left, a rectangular box labeled "PHONO OUT" contains gold-plated Right (R) and Left (L) RCA audio output jacks, with the Right jack featuring a red center ring and the Left jack featuring a white center ring. To the right of the outputs, a separate section labeled "SIGNAL GND" features a metallic ground screw terminal with a printed grounding symbol.
1 2

Pioneer PLX-1200 Phono Earthing Wire 406-PLX-1288

Pioneer PLX-1200 Phono Earthing Wire 406-PLX-1288

£8.00
£8.00
Sale Sold out
Shipping calculated at checkout.

Pioneer PLX-1200 Phono Earthing Wire Lead (406-PLX-1288) – Eliminate Hum & Restore Audio Quality

Is an annoying background buzz ruining your vinyl listening experience? Restore your setup to peak performance with the Pioneer PLX-1200 Phono Earthing Wire Lead (Part Number: 406-PLX-1288).

This high-quality, 1.5-meter replacement ground wire is specifically engineered for Pioneer PLX-1200 turntables. By establishing a secure, stable connection between your turntable chassis and your amplifier or phono stage, it effectively eliminates unwanted ground loop hum, feedback, and interference. Enjoy the pristine, crystal-clear audio quality your vinyl collection deserves.

Key Features & Specifications:

  • Perfect Compatibility: Direct fit for Pioneer PLX-1200 turntable models.
  • Optimal Length: 1.5 meters (approx. 5 feet) offers flexible routing options for any DJ booth or home audio setup.
  • Part Number: Genuine manufacturer specification replacement (MPN: 406-PLX-1288).
  • Condition: 100% Brand New and ready for immediate installation.

Why Do You Need a Replacement Ground Lead?

Turntables generate very low-level electrical signals that are highly susceptible to interference. Without a proper earth connection, your amplifier will amplify this interference as a loud, low-frequency hum. Replacing a missing or damaged earthing wire is the quickest, most cost-effective way to clean up your audio signal and protect your equipment.

Technical Details / Specifications Table

Feature Specification
Brand Pioneer Compatible / Replacement
Manufacturer Part Number (MPN) 406-PLX-1288
Product Type Phono Earthing / Ground Wire
Length 1.5 Meters
Compatible Models Pioneer PLX-1200
Condition Brand New

 

 

View full details