Bang & Olufsen Beocenter 2100 2200 4000 Display Lamps (2-Pack)

Bring your vintage audio system back to life with this premium set of replacement Bang & Olufsen Beocenter Display Lamps. Manufactured to exact specifications by Perform Research, these brand-new indicator bulbs are designed to restore the bright, classic illumination of your tuner dial and selector display.

Over time, original vintage bulbs dim or burn out. This high-quality 2-pack ensures your stereo system looks as pristine as it sounds.

Key Specifications

• Brand Compatibility: Bang & Olufsen (B&O)
• Manufacturer: Perform Research
• Condition: Brand New
• Pack Size: 2 Bulbs (1 Pair)
• Part Type: Bi-Pin Filament Indicator Lamps / Bulbs
• EAN: 3841392821470

Supported Models

This replacement bulb kit is fully compatible with the following vintage stereo systems:

• Bang & Olufsen Beocenter 2100
• Bang & Olufsen Beocenter 2200
• Bang & Olufsen Beocenter 4000

Why Choose Perform Research Replacement Lamps?

✔ Exact Fit: Engineered specifically to replace the original indicator bulbs illuminating the tuner dial and the selector names above the button row.

✔ Reliable Performance: Brand-new construction ensures long-lasting brightness and the correct voltage/current draw matching your classic Beocenter circuitry.

✔ Complete Kit: Comes as a convenient pack of 2 to let you replace both primary display bulbs at the same time for uniform brightness.

How to Replace the Bulbs in Your Radio

Is your radio display not as bright as it used to be? The bulbs likely need to be replaced. This is a relatively easy DIY project that can be done with a few basic tools.

Here is a step-by-step guide on how to replace the bulbs in your radio:

Remove the volume slider control. This is usually done by pulling it forward towards you.

Lift open the turntable lid and press the small button on the right. While holding the button pressed, slide the complete radio cover towards you.

Remove the plastic "frame" and prise out the clear perspex display board.

The 2 bulbs are soldered to tiny circuit boards. These circuit boards will need to be removed by carefully pressing the plastic tabs to one side.

De-solder the old bulbs from the back and push through the legs of the new ones. Once the new bulbs are in place, solder them in place.

Once you have replaced the bulbs, reassemble the radio in reverse order.

Tips:

Be careful when de-soldering the old bulbs and soldering the new ones in place. It is important to avoid overheating the circuit boards.

If you are not comfortable soldering, you can take your radio to a professional electronics repair shop.